|Vehicle category||O4 standart|
|Permissible gross weight||38 000 kg|
|Axle load||27 000 kg|
|Fifth wheel load||11 000 kg|
|Fifth wheel height||1 150 mm|
|Payload||32 000 kg|
|Tare weight||6 000 kg|
|Total length||13 827 mm|
|Total width||2 550 mm|
|Loading platfotm height||1 200 mm|
|Loading platfotm length||13 260 mm|
|Loading platfotm width||2480 mm|
|Frontwall height||1200 mm|
- designed jointly with German technicians
- reinforced frame design
- side members made of Swedish high-alloy steel are welded from both sides and keep elasticity at low temperatures
- floor made of moisture-resistant plywood
- welding is fulfilled only by Swedish and Finnish equipment in the argon atmosphere that makes the welded joint to be resistant to low temperatures
- painting is coated according to С4 ISO 12944 category for severe climatic conditions
Welded frame made of longitudinal side members and cross members, the frame height at the front with a flooring is 155 mm. The outer frame profile has the brackets for cargo fastening and fixing. Rear safety bar according to UNECE Regulation No.58.01, two side underrun guards according to UNECE Regulation No. 58.01, two side underrun guards according to UNECE Regulation No.73.00. Mechanical two-speed landing gear.
BPW pneumatic suspension with ability of platform raising and lowering, axles of BPW company of Heavy Duty version, special reinforced design of axles, springs, shock-absorbers and air bellows for Russian road conditions, the second axle is equipped with EBS sensors (ABS). Installation of the first axle lifting device is possible.
WHEELS AND TIRES
7 wheels (including spare one) with wheel disks 22,5х11,75
STANDARD specification – tires 385/65R22,5
Pneumatic, dual-line with BPW or WABCO pneumatic valves, brakes of drum or disk type, EBS, ABS – antilock brake system, diaphragm brake chambers, semi-automatic spring-actuated parking brake system for the brakes of the second and third axles, combined release valve. Without connecting cables with the tractor.
Two-wire system, 24 V operating voltage, explosion-proof design, rear five-chamber lights with integrated trigonal reflector, 2 licence plate lights, 10 side position lights, 2 front position lights. Without connecting cables with the tractor.
The quality of the painting of Grunwald semitrailers meets the requirements of the ISO standard for severe climatic conditions. The key to long-term protection against corrosion – thorough preparation of surfaces before painting. Therefore, all steel parts are shot blasted twice. In the first stage, the metal undergoes a rough purification, the second stage blasting before painting is already fully assembled metal construction.
Painting is made by modern technology paints based on epoxy and polyurethane basis. All used materials are manufactured in Europe and of high quality that allows to use semitriler in harsh conditions. Quality control service controls all technological stages of the process.
- 2 wheel chocks with holders;
- 2 rear rubber bump stops;
- 2 front and 2 rear half mudguards;
- cradle for two spare wheels, holder for one spare wheel;
- tool box with a lock;
- Height increase of the fifth wheel
- Installation of the specific component parts
- Installation of the front lift axle
- Additional strengthening
- Special color design
Grunwald semitrailers are certified by Committee of the Russian Federation for Standardization, Metrology and Certification in accordance with the latest UNECE Regulations.
Warranty period for a semitrailer is 12 month from the date of its sale, for axles – 36 months. Provided EBS system of BPW company be installed, the warranty for the axles is extended up to 5 years.