Tank-container semitrailer 40 Ft
Universal container semi-trailer for transportation of container-cisterns and standard containers of almost all standard sizes. At the design stage, the strength of a semitrailer was calculated sufficient to reliably operate with tanks filled with liquids of high liquid density, with a total mass of up to 32 tons. With equal efficiency, the semitrailer can be used for transportation of standard containers 1x20 Ft, 2x20 Ft, 1x30 Ft and 1x40 Ft.
| Vehicle category
| Container types
1x20 Ft, 2x20 Ft, 1x30 Ft, 1x40 Ft,
| Permissible gross weight
|| 38 000 kg
| Axle load
|| 27 000 kg
| Fifth wheel load
|| 11 000 kg
| Fifth wheel height
|| 1 150 mm
| Carrying capacity
|| 32 000 kg
| Own weight
|| 6 000 kg
| Overall length
|| 12 537 mm
| Overall width
|| 2 500 mm
| Loading height
|| 1 350 mm
| Number of fittings
During the operation, the frame of the tank-container semitrailers experiences instantaneous dynamic and weight loads due to work with liquids, i.e. moving loads of high density. This fact required from the design team, which working together with the specialists of the leading German design bureau, to pay special attention to the strength characteristics of all load-bearing elements. The frame of the semitrailer is designed and manufactured with taking into account the latest technological solutions and is characterized by high reliability and durability.
The first batch of tank-container semitrailers was produced under the Individual program for future operation in the Scandinavian countries and was characterized by an expanded bundle. The semi-trailers of the European lot differed from the serial samples by the pneumatic system and the premium lighting technology. The painting was carried out on the basis of the ExtraPainting principle with a guaranteed coating thickness of 200 microns, the axle mechanisms and supporting devices were additionally stained.
PAINT FOR SEVERE CONDITIONS
The quality of the painting of Grunwald semitrailers meets the requirements of the ISO standard for severe climatic conditions. The key to long-term protection against corrosion – thorough preparation of surfaces before painting. Therefore, all steel parts are shot blasted twice. In the first stage, the metal undergoes a rough purification, the second stage blasting before painting is already fully assembled metal construction.
Painting is made by modern technology paints based on epoxy and polyurethane basis. All used materials are manufactured in Europe and of high quality that allows to use semitriler in harsh conditions. Quality control service controls all technological stages of the process.
Semitrailers are equipped with three axle units SAF IntraDisk Cutom Design or BPW Heavy Duty. All axial mechanisms are made in a strengthened version and adapted for use in difficult road conditions. The warranty for the axial mechanisms - 3 years with unlimited mileage.
- Standard set includes special equipment to work with liquid cargoes: integrated tubes for hoses, drainage gutter, and area with decking made of perforated aluminum.
- Semitrailer also equipped with a spare wheel with its mounting bracket and a winch in the front.
HIGH QUALITY COMPONENTS
All mounted components - axles, pneumatic system, electrical, supports and fittings are purchased directly from leading European manufacturers. This ensures reliability and simplifies the service of technics due to a larger number of service stations and the availability of spare parts.
- BPW / SAF axles with drum brakes.
- Front / rear lift axle installation
- SMARTBOARD information block.
The warranty period for Grunwald semitrailers is 12 months from the date of sale. Warranty on the axial unit is 3 years with unlimited mileage.