Low-bed lightweight container semitrailer
The most advanced proposal Grunwald in the transport of heavy containers.The main advantage of the model is the legal carrying capacity of 29 000 kg. In direct interpretation of the current law, this is the maximum figure.
| Vehicle category
|| O4 standard
| Container types
||1x20 Ft, 1x30 Ft, 1x40 Ft, 1x40 Ft HC|
| Permissible gross weight
|| 47 000 kg
| Axle load
|| 36 000 kg
| Fifth wheel load
|| 11 000 kg
| Fifth wheel height
|| 1 100 mm
| Carrying capacity
|| 42 300 kg
| Permissible gross weight
|| 5 700 kg
| Overall length
|| 12 655 mm
| Overall width
|| 2 500 mm
| Loading height (40 Ft HС/40 Ft)
|| 1 100 / 1 220 mm
| Number of fittings
ORIGINAL LAYOUT SCHEME
Understanding all the specifics of working with heavy containers, Grunwald engineers are constantly looking for new technical opportunities to increase the legal capacity of trailers and create additional value for customers and carriers. Light low-bed container semitrailer is another step forward in increasing the efficiency of business of transport companies. Taken layout and technical solutions have resulted in a wonderful combination of performance. The obvious design changes are the refusal to install the rear work platform and the transition from steel rims to aluminum.Also, there are hidden and invisible at first glance solutions, such as optimizing the layout of the axle assembly. As a result, the semitrailer's own mass does not exceed 5 700 kg, and the legal payload is 29 000 kg.
PAINTING FOR SEVERE CONDITIONS
The quality of the Grunwald semitrailer painting meets the requirements of the ISO standard for severe climatic conditions. The guarantee of long-term product protection against corrosion is the appropriate preparation of the surfaces before painting. Therefore, the fully assembled metal structure is subjected to thorough shot blasting.
Painting is made by modern technologies with paint and varnish materials on epoxy and polyurethane basis. All used materials of European manufacture and exceptionally high quality, which allows to successfully operate the semitrailer in severe climatic conditions. When painting by the quality control service, step-by-step control is carried out at all technological stages of the process.
REINFORCED AXLES AND SUSPENSION
As standard, four BPW Heavy Duty axles with a lifting capacity of 9 tons each on the air suspension and the WABCO pneumatic system are installed on the semitrailer. As an option, it is proposed to install the fourth axle assembly in the swivel self-resetting axis. This increases the maneuverability of the semitrailer and predicts an increased wear of rubber. Warranty from the manufacturer on the axle unit is 3 years without mileage limitation. The BPW Heavy Duty axles are fully adapted for difficult road conditions and have an increased resource compared to the standard European axis. SAF Custom Design axles on an integral suspension with drum or disc brakes are available on request.
HIGH QUALITY COMPONENTS
All hinged components - axles, pneumatic system, electrical, supports and fittings are purchased directly from leading European manufacturers. This approach ensures reliability in operation and simplifies maintenance of equipment due to a greater number of service stations and greater availability of spare parts
- The front or rear lifting axle. In some cases, it helps to reduce rubber wear.
- Rear self-standing swivel axis.
- SAF INTRADRUM / INTRADISC Custom Design.
- Information block SMARTBOARD. The unit allows you to quickly and conveniently obtain information about the load on the axle, the distance of the semitrailer and the state of the brake system.
- Special color design of the semitrailer. Coloring in any color according to the RAL system.
The warranty period for the Grunwald semitrailer is 12 months from the date of sale. Warranty on the axle unit as standard - 3 years without mileage limitation.