HD container semitrailer on double-tire wheels
|Vehicle category||O4 standart|
|Container types||1x20 Ft, 2x20 Ft, 1x30 Ft, 1x40 Ft|
|Permissible gross weight||51 000 kg|
|Axle load||36 000 kg|
|Fifth wheel load||15 000 kg|
|Fifth wheel height||1 250 mm|
|Payload||44 750 kg|
|Tare weight||6 250 kg|
|Total length||12 355 mm|
|Total width||2 500 mm|
|Loading height||1 370 mm|
|Amount of twist locks||12|
- designed jointly with German technicians
- frame reinforced design, welded from both sides
- side members made of Swedish high-alloy steel
HD container semitrailer on double-tire wheels is designed for transportation of the following container types:
- 1х20 foot standard container, weight not exceeding 30 000 kg;
- 2х20 foot standard containers, total weight not exceeding 32 000 kg;
- 1х30 foot standard container;
- 1х40 foot standard container;
- overall length is 12 400 mm
- overall width is 2 500 mm
- height of the fifth wheel coupling is 1 250 mm
- tare weight is 6 250 kg
- permissible gross weight is 51 000 kg
- fifth wheel load 15 000 kg
- axle load 36 000 kg
Welded frame of longitudinal side members and cross members, six container beams with two container locks on each, two king pin positions, rear safety bar according to UNECE Regulation No.58.01, two side underrun guards according to UNECE Regulation No.73.00, two-speed landing gear of HAAKON, JOST manufacturers.
Spring or pneumatic suspension and axles of BPW manufacturer, special reinforced design of axles, springs, shock-absorbers and air bellows for Russian road conditions, the second axle is equipped with ABS sensors.
WHEELS AND TIRES
13 wheels (including 1 spare wheel), tires 385/55R22,5
Pneumatic, dual-line with BPW or WABCO pneumatic valves, brakes of drum or disk type, ABS – antilock brake system, ABS configuration - 2S/2M, ABS socket according to ISO7638, brake force regulator, diaphragm brake chambers, semi-automatic spring-actuated parking brake system for brakes of the second and third axles, combined release valve. Without connecting cables with the tractor.
Two-wire system, 24 V operating voltage, explosion-proof design, rear five-chamber lights with integrated trigonal reflector, 2 licence plate lights, 8 side position lights, 2 front position lights. Without connecting cables with the tractor.
The quality of the painting of Grunwald semitrailers meets the requirements of the ISO standard for severe climatic conditions. The key to long-term protection against corrosion – thorough preparation of surfaces before painting. Therefore, all steel parts are shot blasted twice. In the first stage, the metal undergoes a rough purification, the second stage blasting before painting is already fully assembled metal construction.
Painting is made by modern technology paints based on epoxy and polyurethane basis. All used materials are manufactured in Europe and of high quality that allows to use semitriler in harsh conditions. Quality control service controls all technological stages of the process.
- 2 wheel chocks with holders;
- 2 rear rubber bump stops;
- mudguards over all the wheels;
- cradle for two spare wheels, holder for one spare wheel;
- tool box with a lock;
- fire extinguisher in a box.
Grunwald semitrailers are certified by Committee of the Russian Federation for Standardization, Metrology and Certification in accordance with the latest UNECE Regulations.
Warranty period for a semitrailer is 12 month from the date of its sale, for axles – 36 months